Dawn simulation

Dawn simulation works by gradually turning on a light, generally 40w or 60w, over a period of time, most typically 30 min, in order to simulate a sunrise.  The light goes through your eyelids and moves your sleep stage to the point where it should wake you up naturally, meaning that you wake feeling as refreshed as you’re going to get and that hormones such as cortisol do what they’re meant to.  I find that when it wakes me up, it feels like I blink and I’m awake, rather than being dragged kicking and screaming into consciousness.  They all have backup alarms you can set just in case.  Most people don’t need them, but some do, and can still find that while the light isn’t quite enough to wake them up on its own, they do feel much better when they wake up.

As well as making it easier to get up in the morning, some research has found dawn simulation to be as effective or nearly as effective as bright light therapy for treating SAD, and it may work well for non-seasonal depression too.  This is despite the fact that it doesn’t use such bright light, just an ordinary bedside lamp or equivalent.  It’s thought to be something to do with the gradual increase in light having the effect.  The advantage over bright light therapy is that the treatment is over by the time you get up, you don’t have to tether yourself to a light box in the morning, but the disadvantage is that it may not be as effective.  Companies selling both tend to recommend it for mild SAD and bright light boxes for more severe SAD, I’ve noticed.

Dawn simulators also generally offer dusk simulation as well, where the light fades down gradually to help you get to sleep.  I think there’s some research around showing that it helps a bit with insomnia.  I’ve not really used this setting much as it’s less convenient, though I find it relaxing when I do.  I use dawn simulation because it helps stabilise my sleep pattern even further, and because it helps both myself and my partner to get up in the morning.

One common problem with dawn simulators is that they tend to buzz when the light is ramping up or down.  The best solution is to get one of the new energy-saving halogen bulbs, also called halogen incandescent, which are the same shape as standard incandescent bulbs and can be dimmed.  Not only will they save you at 30% on energy (42w is equivalent to 60w and so on, though I and many other people think they actually seem to be brighter than that) and last longer, but the light is good quality and they don’t buzz.  You can’t use fluorescent bulbs in a dawn simulator (I never recommend them anyway as the light causes problems for so many people), you can’t use the usual halogen bulbs, you can’t use LED bulbs if you’ve managed to find one, you can just use them with standard incandescent or energy-saving halogen.  This is for where you put in the bulb yourself: there are a couple of types of dawn simulator around using fluorescent or LED lights already built in.  If you get the type of dawn simulator which plugs into a lamp, again it has to be the sort of lamp which takes incandescent bulbs, and it can’t be a lamp which already has any sort of dimmer fitted, such as a touch lamp.  Just use an ordinary table, bedside or desk lamp.

There’s a new type of dawn simulator which is combined with a lightbox, such as this one (do read reviews, there are some poor quality ones out there by other manufacturers).  They may be a good solution for people wanting to try both dawn simulation and bright light therapy, but bear a few things in mind.  Firstly, it comes up to full lightbox brightness rather than the brightness of a 40w or 60w bulb, so that you will most likely be awake long before it’s anywhere near fully bright.  One solution could be to set a 90 minute sunrise and assume that you’ll be awake after, say, 30 min.  You need your dawn simulation to be by your bed but are unlikely to want to be using your bright light box by the bed, though if you read in bed in the morning or have your laptop close to your bed you could be OK.  The other point that occurs to me is that since the light is much brighter than is needed for dawn simulation, you could place it further away from the bed (e.g. by your computer, if it’s in the bedroom) and just point it in the right direction.  If I was starting light therapy all over again, I’d probably have gone for one of these and hoped that I’d be able to work something out once I’d fiddled with it enough.

I started off years ago with an all-in-one Bodyclock by Lumie where the lamp is built in, but even though it was a 60w bulb I found that it wasn’t bright enough for a reading lamp, plus Lumie often get slated for poor product build quality.  I sold it on eBay and bought myself a Sunrise System which plugs into a lamp or lamps of your choice, and vastly prefer it.  Mine  eventually became faulty and I sent it in for repair, where they reported that it had been damaged by a power surge (at which point I promptly bought a surge protector) and sent me a replacement which is slightly different from the older model.  They can take a bit of getting used to, and I think the company needs to continue tweaking them (though at the very picky level), but generally they’re excellent.  They have lots of useful features, such as being able to set the time individually for each day of the week.  We have it set to finish at 9 am Mon-Sat and 10.30 on Sunday, when my partner starts work later.  Actually he starts quite a lot later on Sundays, but I want to keep myself in a good routine while having a bit of a lie-in.

One of the great things about dawn simulators of this sort is that you can plug them into more than one lamp as long as you don’t exceed the total wattage, which in the case of the Sunrise System is 200w in the US and 300w in Europe.  That’s enough to hook it up to lights all over the bedroom if you like, though most people like to hook it up to a light on each side of the bed.  We’ve found that I get woken up better than my partner does by light, that he doesn’t like waking up to full light and generally prefers it to be dimmer on his side, that he still needs his alarms as he’s trained himself to respond to those, and that I take longer to get up once I’m awake, so that by the time he’s had a shower and got ready for work it’s about the time that I’ll be getting up.

So on my side of the bed, the dawn simulator is hooked up to my bedside light, which is a 40w equivalent low-energy halogen bulb in an anglepoise lamp that faces the wall, and on my partner’s side there’s a little 25w spotlight hidden behind a vase which points into the corner and is enough for ambient lighting.  My partner’s bedside reading light is independent of the dawn simulator.  The dawn simulation starts at 8 am, which is when the first of his three alarms go off.  He gets up at 8.30 when the light is up to half brightness, and I get up at 9 when the light is at full brightness.  As there are alarms going off from 8, I can be anywhere from awake to dozing to having fallen asleep again while the light is increasing, but it doesn’t seem to prevent it from being effective.  Occasionally I sleep in later than 9, but it’s probably only once a week, which for me is fantastic.  This helps keep my sleep stabilised even if I went to bed too late the night before.  I’m getting up earlier than I used to (even when I was using the lightbox), and it’s great being able to get up earlier in the morning and go to bed at the same time as my partner.

Explore posts in the same categories: Articles, Light therapy

Tags: , , , , , , , , , ,

You can comment below, or link to this permanent URL from your own site.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: